McIntosh has a long and distinguished history with tuners. The MR78 from the early 1970s is considered by many to be one of – if not the best – tuners ever made. The MR87 AM/FM Tuner continues this legacy by allowing you to enjoy the multitude of free music streaming over the airwaves.
OVERVIEW
The MR87 features proprietary radio-frequency (RF) circuitry to receive strong FM signals from nearby stations – something that can overload other tuners – without distortion while also receiving weaker FM signals located further away with little to no noise. The included RAA2 AM antenna features a 20-foot (6m) long cable that allows flexibility in placing the antenna in order to achieve the best AM reception.
AM and FM stations may be luxuriously tuned using the smooth acting tuning knob and glass dial with illuminated pointer. The digital readout will display various information such as station name, music genre, artist name and song title when transmitted by the station. Up to 20 stations in each the AM and FM band may be stored in memory. Stations may be scanned with either the front panel controls or remotely from the included remote control.
Advanced DSP tuning minimizes multipath tuning noise for clear audio quality. Both analog and digital outputs are included to connect the MR87 to your preamplifier or other system components.
The MR87’s classic black glass front panel, knobs and brushed aluminum end caps are all housed in an attractive polished stainless steel chassis that delivers a timeless look. It can be paired with a variety of amplifiers, speakers, room correction devices, CD players, turntables, home theater processors, and other source components to make a complete home audio system.
SPECIFICATIONS
- FM TUNING RANGE: 87.9MHz - 107.9MHz (USA)
- FM CHANNEL SPACING: 50kHz, 100kHz or 200kHz
- FM ANTENNA INPUT: 75 ohms, Type “F” Coax connector
- SENSITIVITY: N/A
- SIGNAL TO NOISE RATIO: N/A
- FREQUENCY RESPONSE: N/A
- TOTAL HARMONIC DISTORTION: N/A
- STEREO SEPARATION: N/A
- USEABLE SENSITIVITY: 2.2uV (18.1dBf)
- 50DB QUIETING SENSITIVITY: 1.5uV (14.8dBf)
- SIGNAL TO NOISE RATIO: Mono: 70dB / Stereo: 68dB
- FREQUENCY RESPONSE: ±1dB 20Hz to 15,000Hz
- TOTAL HARMONIC DISTORTION: Mono: 0.4% / Stereo: 0.8%
- CHANNEL SELECTIVITY: 60dB Adjacent Channel / 66dB Alternate Channel
- STEREO SEPARATION: 38dB
- AM TUNING RANGE: 530kHz - 1710kHz (USA)
- AM CHANNEL SPACING: 10kHz
- AM ANTENNA INPUT: Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
- SIGNAL TO NOISE RATIO: N/A
- FREQUENCY RESPONSE: N/A
- TOTAL HARMONIC DISTORTION: N/A
- STEREO SEPARATION: N/A
- SENSITIVITY: 350uV/m
- SIGNAL TO NOISE RATIO: 50dB
- FREQUENCY RESPONSE: 0dB, -6dB 50Hz to 3,000Hz
- TOTAL HARMONIC DISTORTION: 0.5%
- SELECTIVITY: 45dB Adjacent Channel
- DIGITAL COAXIAL OUTPUT: 0.5V p-p/75 ohm
- DIGITAL OPTICAL OUTPUT: -15dbm to -21dbm
- SAMPLING FREQUENCY: 48kHz
- OUTPUTS UNBALANCED: 1 Stereo
- OUTPUTS BALANCED: 1 Stereo
- DIGITAL COAXIAL OUTPUT: 1
- DIGITAL OPTICAL OUTPUT: 1
- AM ANTENNA INPUT: 1
- FM ANTENNA INPUT: 1
- XM ANTENNA INPUT:0
- REAR PANEL DATA INPUT:Yes
- REAR PANEL IR SENSOR INPUT: Yes
- POWER CONTROL INPUT: Yes
- POWER CONTROL OUTPUT: Yes
- RS232 CONTROL INPUT: Yes
- SERVICE PORT: Yes
- BANDS: AM/FM
- RATED OUTPUT: 1Vms Unbalanced; 2Vms Balanced
- OUTPUT IMPEDANCE: 100 ohms Unbalanced or Balanced
- STANDBY POWER REQUIREMENT: <0.5 watt
- DIMENSIONS (W X H X D): 17-1/2" (44.45cm) x 6" (15.24cm) x 18" (45.72cm)
- WEIGHT: 25.5 lbs (11.6 kg)
$499.00
$149.00
