We're sorry! This product is now sold. If you're looking for a specific pre-owned component, contact us HERE and we'll let you know if another becomes available!
Designed to deliver a continuous 250 watts per channel, the MA7000 Integrated Amplifier leads
an already impressive array of McIntosh integrated amplifiers delivering uncompromised
performance in a convenient, single-box solution.
OVERVIEW
Super condition trade-in McIntosh MA7000 Integrated Amplifier.
Amp comes in original box with manual, power cord, and remote control.
Amp is rated 8/10 for some minor cosmetic wear consistent with age and use.
SPECIFICATIONS
- POWER OUTPUT: 250 watts is the minimum sine wave continuous
average power output per channel, both channels operating
- OUTPUT LOAD IMPEDANCE: 2, 4 or 8 Ohms
- RATED POWER BAND: 20Hz to 20,000Hz
- TOTAL HARMONIC DISTORTION: 0.005% maximum with both channels operating from 250 milliwatts to rated power, 20Hz to 20,000Hz
- DYNAMIC HEADROOM: 2.0dB
- FREQUENCY RESPONSE: +0, -0.5dB from 20Hz to 20,000Hz / +0, -3dB from 10Hz to 100,000Hz
- PREAMPLIFIER MAIN OUTPUT (FOR RATED INPUT): 2.5V unbalanced (8V Maximum) / 5.0V balanced (16V Maximum)
- SENSITIVITY (FOR RATED OUTPUT): High Level, 250mV unbalanced, 500mV balanced / Phono, 1.2 mV Power Amp In, 2.5V
- SIGNAL TO NOISE RATIO (A-WEIGHTED): High Level, 100dB below rated output / Phono, 84dB below 5mV input / Power Amplifier, 115 below rated output
- INTERMODULATION DISTORTION: 0.005% maximum, if the instantaneous peak power is 500 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20,000Hz
- WIDE BAND DAMPING FACTOR: Greater than 40
- MAIN OUTPUT IMPEDANCE: 50 Ohms
- INPUT IMPEDANCE: High Level, 20K Ohms Phono, 47K Ohms; 65pF / Power Amp In, 10K Ohms
- MAXIMUM INPUT SIGNAL: High Level, 8V unbalanced, 16V balanced / Phono, 45mV Power Amplifier In, 16V
- POWER GUARD: Less than 2% THD with up to 16dB overdrive at 1,000Hzv
- VOLTAGE GAIN: High Level to Rec Output: 0dB / High Level to Main Output: 20dB / Phono to Rec Output: 46dB / Phono to Main Output: 66dB / Power Amplifier: 25dB
- EQUALIZER CONTROLS: Variable 12dB boost to 12dB cut at 30Hz, 150Hz, 500Hz, 1500Hz and 10,000Hz
- Standby: Less than 1 watt Note: Refer to the rear panel of the MA7000 for the correct voltage.
- OVERALL DIMENSIONS (H X W X D) INCLUDING THE FEET AND FRONT PANEL KNOBS AND CABLES: Width is 17-1/2 inches (44.45cm) 9-7/16 inches (23.97cm), 17-1/2 inches (44.45cm) x 22 inches (55.88cm)
- WEIGHT: 97.5 pounds (44.3 kg) net 130.5 pounds (59.2 kg) in shipping carton
ADDITIONAL INFORMATION
Please call 734.662.3595 and ask for Richard if you have any questions about this product.
We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.