We're sorry! This product is now sold. If you're looking for a specific pre-owned component, contact us HERE and we'll let you know if another becomes available!
The Datasat RA7300 Multi-Channel Power Amplifiers bring a new level of quality and flexibility to high-end home theatre and multi-channel music systems. Perfect for anything from small media systems to dedicated top of the line home cinemas or even to outfit an entire home, its advanced circuitry and careful design delivers one of the industry's most powerful, versatile and quietest power amplifiers.
The RA7300 is designed to be versatile and is rated for 4 and 8 ohm loads. With a rated output of 300 watts RMS into seven channels at 8 ohms, the RA7300 is powerful enough to deliver consistently excellent performance in any system. The RA7300 amplifier is deigned to complement Datasat's RS20i high-end audio processor.
OVERVIEW
Store demo Datasat RA7300 Multi-Channel Power Amplifier in black finish.
Unit comes in original box with owner's manual, (2) 20-amp power cords, and rack mounts.
Unit is in excellent working condition. Unit was rack-mounted and has some cosmetic blemishes as a result. Please see photos for more detail.
FEATURES
-
The quietest amplifiers available: Dual thermal sensors, one for each channel or channel bank, control a very low speed fan with substantial heat sinks. The fan only operates when program material requires additional cooling to ensure any fan noise is always masked by the content. In this way, the RA7300 delivers a signal-to-noise ratio of >125dB ('A' weighted, referenced to full output).
-
Innovative, modular design: Each RA7300 amplifier channel is designed complete with the power supply on a single printed circuit board. Separate power supplies for each channel minimise crosstalk, noise and distortion. This approach provides for ease of replacement and system maintenance.
-
Enhanced versatility: The RA7300 is rated for 4 and 8 ohm loads. It delivers 7 channels of 300 watts RMS power at 8 ohms. It delivers 450 watts RMS at 4 ohms.
-
Extended connectivity: The RA7300 features DB25 connectors with pass-through and channel ID selections that mate perfectly with the Datasat RS20i audio processor. It also includes balanced XLR and unbalanced RCA connectors.The RA2400 features DB25 connectors with pass-through and channel ID selectionsthat mate perfectly with the Datasat RS20i audio processor. It also features balanced XLR and unbalanced RCA connectors.
-
Consistent, thermal-independent operations: The RA7300 amplifier uses dual-DC servos to ensure that DC offset is at a minimum and thermal-track transistors maintain the amplifiers at their optimum bias point independent of amplifier temperature. The amplifiers operate without current limiting.
-
Advanced circuitry: The fully balanced differential topology of the RA7300 doubles amplifier slew rate and reduces noise by half. It uses current feedback to increase amplifier speed.
-
Efficient standby: The Datasat RA7300 amplifier meets or exceeds all international standards for standby power consumption including the new 122 watt standard.
SPECIFICATIONS
- Power Output: 300 watts RMS x 7 channels @ 8ohms; 450 watts RMS x 7 channels @ 4ohms
-
Frequency Response: 20Hz-20kHZ, +0, -0.25dB
-
THD, 20Hz-20kHz: <0.05%
-
THD, 1kHz, rated power: <0.005%
-
IMD: <0.05%
- Dual AC cords
-
Channels: User selectable for any of 8 channels from DB25 input connector via rear panel gold-plated sealed DIP switches.
-
Power Bandwidth, 10Hz-80kHz: minus 0.6dB @ 80Hz
-
Voltage Gain: 27.1dB
-
Slew Rate: >40/us
-
Crosstalk @ 1kHz: >80dB
-
Input impedance: 50kΩ (Balanced, 25kΩ each leg)
-
Input Sensitivity: 2.16V
-
Circuit topology: Fully balanced design utilizing thermal track, current feedback and DC Servo.
-
Connectivity: Input: RCA unbalanced, XLR balanced, DB25 balanced; Output: 5-way binding posts, DB25 pass through
-
Remote Trigger Voltage: 3-24V
- Signal-to-Noise ratio (20Hz-20kHz)
-
Reference rated output, 'A' weighted: >125dB
-
Reference rated output, unweighted: >123dB
-
Residual noise, 'A' weighed: <30 microVolts
-
Damping Factor: >200 to 2kHZ
-
Dimensions: Fan cooled, 5 Rack Chassis: H/W/D: 22.23cm x 43.18cm (48.26cm with rack ears) x 53.34cm Uses 5RU (Feet removed)
-
Weight: 123lbs
-
Weight shipping: 163lbs
-
Power requirements: 120V, 60Hz & 230V,50Hz
ADDITIONAL INFORMATION
Please call 734.662.3595 and ask for Richard if you have any questions about this product.
We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.
