Audio Research continues the tradition of advancing state of the art in music reproduction with the introduction of the Reference Phono 2 SE preamplifier. Using component technologies derived directly from the acclaimed Reference Anniversary preamplifier, the Reference Phono 2 SE provides substantial sonic enhancements beyond its predecessor and brings the listener closer to the music than ever.
OVERVIEW
Fantastic condition trade-in Audio Research REF Phono 2SE in Silver finish.
Phono preamplifier comes in original box and packing with remote control, power cord, and printed owner’s manual.
Preamp is rated 8/10 for minor cosmetic wear consistent with age and use, including a small nick on top panel corner (see photos).
SPECIFICATIONS
- FREQUENCY RESPONSE: ± .2dB of RIAA, 10Hz to 60kHz: 3dB points below 0.3Hz and above 300kHz.
- DISTORTION (THD): Less than .002% at 1.0V RMS 1kHz BAL output.
- NOISE & HUM: 0.22µV equivalent input noise, IHF weighted, shorted (Low Gain) input (73 dB below 1mV 1kHz input). 0.055µV equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input).
- GAIN: Selectable 51 dB (Low), 74 dB (High) at 1 kHz BAL; 45 dB (Low), 68dB (High) at 1 kHz SE. (MC & MM compatible).
- INPUT IMPEDANCE: 47K ohms and 100pF SE. Additional selectable loads: 1000, 500, 200, 100, 50 ohms and Custom.
- OUTPUT IMPEDANCE: 200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms minimum and 2000pF maximum.)
- OUTPUT POLARITY: Non-inverting
- MAXIMUM INPUTS: 250mV RMS at 1kHz (680 mV RMS at 10kHz).
- RATED OUTPUTS: 0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at ½% THD at 1kHz, 40V SE.)
- POWER SUPPLIES: Electronically-regulated low and high voltage supplies. Line regulation better than .01%.
- TUBE COMPLEMENT: (4) 6H30 dual triodes, plus (1 each) 6H30, 6550C in power supply.
- POWER REQUIREMENTS: 100-135VAC 60Hz (200-270VAC 50/60Hz) 140 watts maximum. 2W standby. Line fuse 5A SLO BLO (T2A SLO BLO 230V).
- OTHER: Buttons: Front (6) Power, Input, Gain, Load, RIAA, Mute.
- DIMENSIONS: 19" (48 cm) W x 7" (17.8 cm) H (standard rack panel) x 15½" (39.4 cm) D. Handles extend 1½" (3.8 cm) forward of front panel.
- WEIGHT: 27 lbs. (12.3 kg) Net; 38 lbs. (17.3 kg) Shipping.
ADDITIONAL INFORMATION
Please call 734.662.3595 and ask for Richard if you have any questions about this product.
We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.