At Paragon, McIntosh products are not just pictures on our website. As the only World of McIntosh Experience Center in North America, we proudly display all of these products in our showroom. Buy with confidence from a leading McIntosh brick and mortar/authorized online retailer.
– Larry Marcus, President
The monoblock MC611 Quad Balanced Power Amplifier produces 600 Watts of power – enough to satisfy nearly any loudspeaker. A pair of MC611s can easily drive an impressive home stereo system, or add more of them to power a home theater. Thanks to McIntosh’s unique output Autoformer™ technology, your speakers will receive the full 600 Watts regardless if they have 2, 4 or 8 Ohm impedance, allowing you the ability to use the MC611 to its full potential.
The MC611 has received numerous updates and improvements compared to the previous 600 Watt monoblock model. Chief among them is that filter capacity has been doubled, which has resulted in a dramatic 55% increase in dynamic headroom from 1.8dB to 2.8dB. This twofold increase in filter capacity also helps improve the performance of low end bass frequencies.
The front panel features new direct LED backlighting for improved appearance and color accuracy. On top, the audio Autoformer and power transformer remain seated just behind the front panel, but are now contained in new glass topped enclosures. Behind them are 2 of McIntosh’s Monogrammed Heatsinks™, which connect to advanced high current output transistors that help eliminate thermal equilibrium lag time. A screening of the amplifier’s block diagram has been added to the panel located between the heatsinks.
On the back, there continues to be 3 sets of Solid Cinch™ speaker binding posts (1 set for each speaker impedance), but more space has been added between each set to allow for easier speaker cable management. McIntosh’s eco-friendly power management system, which will turn the amp off after a set amount of time when no input signal has been detected, has also been added. Other enhancements include heavier gauge internal wiring and upgraded circuit components.
In addition to all these improvements, the MC611 is full of other exclusive McIntosh technologies:
Both a balanced and unbalanced output are included to make bi-amping or tri-amping your speakers easier; they can also be used to send the audio signal to a secondary system if your preamplifier does not have enough outputs, or to connect a powered subwoofer.
The MC611 sits on a beautiful polished stainless steel chassis and features the timeless McIntosh aesthetic of a black glass front panel, illuminated logo, control knobs, aluminum handles and of course a large 8” (20.3 cm) fast responding blue Watt meter.
POWER OUTPUT PER CHANNEL
600 Watts @ 2, 4 or 8 Ohms
NUMBER OF CHANNELS
TOTAL HARMONIC DISTORTION
S/N BELOW RATED OUTPUT
RATED POWER BAND
20Hz to 20kHz
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3.0dB from 10Hz to 100,000Hz
REMOTE POWER CONTROL
MULTI-CHANNEL DB25 CABLE
METER LIGHT SWITCH
Glass with handles
Polished stainless steel & black painted steel
SPEAKER BINDING POST TYPE
Patented Solid Cinch™ Speaker Binding Posts
WEIGHTS & DIMENSIONS
DIMENSIONS (W X H X D)
17-1/2″ (44.45cm) x 9-7/16″ (23.97cm) (including feet) x 22″ (55.88cm) (including front panel, handles and cables)
97.5 lbs (44.32 kg)
Subject to the terms and conditions stated below, McIntosh Laboratory, Inc. (“McIntosh”) warrants to the original owner that this Product shall be free from defects in workmanship or materials for a term of three (3) years from the date when it was purchased from an Authorized McIntosh Dealer. Provided, however, that rather than the three (3) years of coverage afforded the Product generally, where applicable, vacuum tubes contained in our Products are warranted for 90 days from the date of purchase, hard disc drives and projector lamps contained in our Products are warranted for one (1) year from the date of purchase.
In the event of any defect covered by this Warranty, McIntosh shall without charge provide all parts, materials, and labor necessary to restore the Product to its original specifications. After repair, McIntosh shall return the Product to its owner at the owner’s expense. In the alternative, McIntosh may at its sole option either replace the Product without charge, or if replacement is not commercially practicable or repair or replacement cannot be accomplished within a reasonable time, McIntosh may refund the purchase price of the Product, subject where appropriate to reasonable depreciation for actual use in accordance with applicable laws, in full satisfaction of its warranty obligations. McIntosh or its Authorized Service Agency will undertake to complete the repair and return of the Product as soon as circumstances permit, unless prevented by causes beyond their reasonable control.
This Warranty does not cover any of the following: (a) glass panels, cabinetry, trim, or other appearance items (except where they are defective at the time of original sale and the Product is delivered for repair within the first thirty (30) days thereafter); (b) batteries, or damage to the Product caused by failure of batteries; (c) or damage to the Product caused by failure of projector lamp; (d) loss of, or damage or corruption to, digital data, files, or other information content of any kind, regardless of cause; (e) failures arising from accident, catastrophe, misuse, neglect, or failure to properly connect and operate the Product in accordance with the accompanying instructions; (f) failures arising from improper installation or removal of the Product; or (g) failures arising from any tampering, alteration, or damage to the Product or attempted servicing of the Product by anyone other than McIntosh or an Authorized McIntosh Service Agency; and McIntosh shall have no liability or obligation of any kind with respect to any of the foregoing types of failures.